The most widely used self-regulating cables for protection of pipes:
Line™Samoreg10W/10°C
Self-regulating cable with the output of 10 W/m at 10 °C, or Line™SamoregF10W/10°C *. The letter F stands for fluoropolymer (Teflon) insulation. The cable is suitable in aggressive environments.
Line™ Samoreg25W/10°C
Self-regulating cable with the output of 25 W/m at 10 °C, or Line™SamoregF25W/10°C *
KIT 03 Self-shrinking connector and wire end cap
are used to connect a self-regulating cable, a power lead wire and a cable end seal. We can also use this kit to connect two shorter self-regulating cables. It is not allowed in explosive environment.
For designing optimum regulation, please, contact our specialist of the brand warm floor.
Sel-regulating cables for explosive environment (Ex):
Line™11FSM2-CT
Sel-regulating cable with the power output of 11 W/m at 5 °C: Line™11FSM2-CT *, or Line™11FSM2-CF *.
Line™23FSLe2-CT
Sel-regulating cable with the power output of 23 W/m at 5 °C: Line™23FSLe2-CT *, or Line™23FSLe2-CF *.
* The letter F stands for fluoropolymer (Teflon) insulation. The cable is suitable in aggressive environments.
Our intelligent systems for protecting pipes against frost, and their temperature maintaining, are designed for homes as well as industrial facilities. We have got an optimal solution for all cases, even including explosive environments.
Advantages of pipe protection by self-regulating (intelligent) heating cable:
- Water will run in the pipes even at temperatures below 0 °C.
- The pipes are protected against damage, thus preventing repair costs or costly outages in production.
- Reliability is tested by many years of experience.
- Intelligent cable is self-regulating, therefore its operation is cost-effective.
- Easy and quick installation provides for cable shortening exactly according to your need.
- It can be installed in as well as on the pipe.
Simple design:
You will easily find everything needed in the table of heat losses in the pipes. According to the pipe diameter, insulation thickness and maximum permissible ambient temperature below 0 °C, you can read the heat loss of the pipes in W/m. Based on the heat loss, you can select a suitable cable with necessary output in W/m.
Documents to download:
- protection-systems-leaflet-en.pdf [pdf, 1.2 MB]
The most widely used self-regulating cables for protection of pipes:
Line™Samoreg10W/10°C
Self-regulating cable with the output of 10 W/m at 10 °C, or Line™SamoregF10W/10°C *. The letter F stands for fluoropolymer (Teflon) insulation. The cable is suitable in aggressive environments.
Line™ Samoreg25W/10°C
Self-regulating cable with the output of 25 W/m at 10 °C, or Line™SamoregF25W/10°C *
KIT 03 Self-shrinking connector and wire end cap
are used to connect a self-regulating cable, a power lead wire and a cable end seal. We can also use this kit to connect two shorter self-regulating cables. It is not allowed in explosive environment.
For designing optimum regulation, please, contact our specialist of the brand warm floor.
Sel-regulating cables for explosive environment (Ex):
Line™11FSM2-CT
Sel-regulating cable with the power output of 11 W/m at 5 °C: Line™11FSM2-CT *, or Line™11FSM2-CF *.
Line™23FSLe2-CT
Sel-regulating cable with the power output of 23 W/m at 5 °C: Line™23FSLe2-CT *, or Line™23FSLe2-CF *.
* The letter F stands for fluoropolymer (Teflon) insulation. The cable is suitable in aggressive environments.
